Ber(Bit Error Rate) Is High - Ebyte E29-T Series User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
Please check the stability of power supply, the voltage cannot fluctuate too much.

Please ensure anti-static operation during installation and in use, high-frequency devices are sensitive to static

electricity
Please ensure that the humidity during installation and in use should not be too high, some components are sensitive

to humidity.
Please avoid using modules at too high or too low temperature if there is no special requirement.


12.3 BER(Bit Error Rate) is high

There are co-channel signal interference nearby, please be away from interference sources or modify frequency and

channel to avoid interference;
Poor power supply may cause messy code. Make sure that the power supply is reliable.

The extension line and feeder quality are poor or too long, so the bit error rate is high;

Copyright ©2012–2023，Chengdu Ebyte Electronic Technology Co.,Ltd.
E29-400TXXX product data sheet
26