Planet GSD-802S User Manual page 18

User's Manual of GSD-802S / GSD-802PS
3.2 Management Methods
The way to manage the Gigabit Ethernet Switch:
- Web Management via a network or dial-up connection.
3.2.1 Web Management
The PLANET Gigabit Ethernet Switch provides a built-in browser interface. You can manage the Gigabit Ethernet Switch
remotely by having a remote host with web browser, such as Microsoft Internet Explorer, Netscape Navigator or Mozilla
Firefox.
Using this management method:
The Gigabit Ethernet Switch must have an Internet Protocol (IP) address accessible for the remote host.
3.2.2 Login the Switch
Before you start configure the Gigabit Ethernet Switch, please note the Gigabit Ethernet Switch is configured through an
Ethernet connection, make sure the manager PC must be set on same the IP subnet address. For example, the default
IP address of the Gigabit Ethernet Switch is 192.168.0.100, then the manager PC should be set at 192.168.0.x (where x is
a number between 2 and 254), and the default subnet mask is 255.255.255.0. Use Internet Explorer 5.0 or above Web
browser. Enter IP address http://192.168.0.100 (the factory-default IP address) to access the Web interface.
When the following login screen appears, please enter the default password "admin" and press Login to enter the main
screen of Gigabit Ethernet Switch. The login screen in Figure 3-1 appears.