Installing Photospan Memory Modules - Epson PhotoPC User Manual

Installing PhotoSpan Memory Modules

Before you install a PhotoSpan module, make sure you erase all pictures
in the camera and turn it off.
CAUTION
PhotoSpan modules are sensitive to static electricity and easily
damaged. Be sure you ground yourself by touching a metal object before
you handle the module, and never touch the module's metallic area.
Follow these steps to install a PhotoSpan module:
1
Open the battery compartment and remove the batteries.
2
Place the camera on end to access the memory socket cover tabs.
A-2
3
Press down on the tabs with your fingers while pushing up on the
socket cover with your thumbs.
4
Position the module so that the notch is aligned with the rounded
corner of the socket.
notch
5
Slide the module into the socket at an angle as shown, pressing
along the edge until it clicks into place.
memory socket
cover tabs
rounded corner