Table of Contents
Advertisement
BOSSMOD USER MANUAL & SETUP FOR LS & HP MACHINES
The base chuck was designed with 4 extra improved features.
1. Adjustable Angle Lift Platform
The lift platform is designed so when using the rotary device as a chuck, this platform allows
you to tilt the device using a nob to accommodate for a tapered item that is clamped in it. This
is crucial since the laser head is mounted on an X/Y gantry and mechanically cannot be adjusted
(illustrated below).
Document Number: QM – 855-914
Revision Number: 001 Revision Date: 11/1/2019
BOSSLASER - Page 2 of 18
Advertisement
Table of Contents
