Troubleshooting; Adjust The Image; Where To Get Help; Telephone Support Services - Epson VS400 Quick Setup

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
NOTE: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the right.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the focus ring to sharpen the image, and the zoom ring to enlarge
or reduce it.
Focus ring
4
If your image looks like
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
5
If your image looks like
projector to correct it.

Using the remote control

Make sure the batteries are installed as shown.
Turn projector
on and off
Turn off projector
display
Access projector
menus
n
For more information on using the remote control, see your User's Guide.
Zoom ring
or , you've placed the projector off to
or , press the or buttons on the
Choose which
source to display
Get solutions to
common problems
Navigate projector
menus

Troubleshooting

If you see a blank screen or the No signal message after turning on your
computer, check the following:
•
Make sure the power light on the projector is green and not flashing,
and the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control
to select the computer as the image source.
•
If you're using a Windows notebook, press the function key on your
keyboard that lets you display on an external monitor. It may be labelled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7).
•
On a Macintosh , select the Mirror Displays setting in the System
®
Preferences Displays utility.

Where to get help

Manual
For more information about using the projector, install the User's Guide from
your projector CD.

Telephone Support Services

To use the Epson PrivateLine ® Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card included with your projector.
This service is available 6 to 6
AM PM
the duration of your warranty period. You may also speak with a projector
support specialist by dialing:
(562) 276-4394 (US), or (905) 709-3839 (Canada), 6
Monday through Friday.
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.

Internet Support

Visit www.epson.com/support for solutions to common problems. You can
download utilities and documentation, get FAQs and troubleshooting advice,
or e-mail Epson.
Registration
Register today to get product updates, special promotions and customer-only
offers. You can use the CD included with your projector, or register online at
www.epson.com/webreg.
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2010 Epson America, Inc. 4/10
Printed in XXXXXX
. You may have to hold down the
, Pacific Time, Monday through Friday, for
to 6 , Pacific Time,
AM PM
CPD-28020