Epson VS350W User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. VS350W
  6. User manual
Epson VS350W User Manual

Epson VS350W User Manual

Epson vs350w: user guide
Hide thumbs Also See for VS350W:
Table of Contents

Advertisement

Quick Links

Download this manual
VS350W/VS410 User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VS350W and is the answer not in the manual?

Questions and answers

Related Manuals for Epson VS350W

Summary of Contents for Epson VS350W

  • Page 1 VS350W/VS410 User's Guide...

  • Page 3: Table Of Contents

    Projector Part Locations ... 13 Projector Parts - Front/Top ... 14 Projector Parts - Rear ... 15 Projector Parts - Base... 16 Projector Parts - Control Panel ... 17 Projector Parts - Remote Control... 18 Setting Up the Projector ... 20 Projector Placement... 20 Projector Setup and Installation Options ...
  • Page 4 Using Basic Projector Features ... 32 Turning On the Projector ... 32 Turning Off the Projector ... 34 Selecting the Language for the Projector Menus... 36 Adjusting the Image Height ... 36 Image Shape... 38 Correcting Image Shape with the Keystone Buttons ... 38 Correcting Image Shape with Quick Corner ...
  • Page 5 Selecting Password Security Types... 57 Entering a Password to Use the Projector ... 58 Saving a User's Logo Image to Display... 59 Locking the Projector's Buttons ... 60 Unlocking the Projector's Buttons ... 61 Installing a Security Cable ... 61 Creating a User Pattern to Display ...
  • Page 6 Solutions When the Image Brightness or Colors are Incorrect ... 100 Solutions When There is No Sound or Low Volume ... 100 Solving Projector or Remote Control Operation Problems ... 101 Solutions to Projector Power or Shut-Off Problems... 101 Solutions to Problems with the Remote Control ... 102 Solutions to Password Problems ...
  • Page 7 Copyright Attribution ... 117...

  • Page 9: Introduction To Your Projector

    The VS350W and VS410 projectors include these special features: Bright, high-resolution projection system • VS350W: Up to 3700 lumens of brightness (white light output and color light output) VS410: Up to 4000 lumens of brightness (white light output and color light output) •...

  • Page 10: Product Box Contents

    Product Box Contents Save all the packaging in case you need to ship the projector. Always use the original packaging (or equivalent) when shipping. Make sure your projector box included all of these parts: Projector Remote control Remote control batteries (two AA alkaline)

  • Page 11: Additional Components

    Parent topic: Projector Features Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online www.epsonstore.com Epson offers the following optional accessories and replacement parts for your projector:...

  • Page 12: Warranty And Registration Information

    In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Road Service brochure for details.

  • Page 13: Notations Used In The Documentation

    View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24 hours a day. • If you still need help after checking this manual and the sources listed above, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help".

  • Page 14: Projector Parts - Front/Top

    Projector Parts - Front/Top Exhaust vent Projector status lights Lamp cover Control panel Air filter cover latch Air filter cover Zoom ring Focus ring A/V Mute slide Front adjustable foot Foot release lever A/V Mute slide lever...

  • Page 15: Projector Parts - Rear

    Remote receiver Parent topic: Projector Part Locations Projector Parts - Rear AC input port S-Video port Computer port USB TypeB port Remote control receiver Speaker Kensington security slot RS-232C port L-Audio-R audio ports Video port Parent topic: Projector Part Locations...

  • Page 16: Projector Parts - Base

    Projector Parts - Base Mounting bracket holes Front adjustable foot Rear feet Security cable attachment point Parent topic: Projector Part Locations...

  • Page 17: Projector Parts - Control Panel

    Projector Parts - Control Panel Power button Source Search button (searches for connected sources) Menu button (accesses projector menu system) Enter button (selects options) Volume buttons (adjust speaker volume), horizontal keystone adjustment buttons (adjust screen shape), and arrow buttons Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons...

  • Page 18: Projector Parts - Remote Control

    Projector Parts - Remote Control Power button...
  • Page 19 Aspect button (selects the image aspect ratio) Num button (when held down, switches numeric buttons to number function) Menu button (accesses projector menu system) Arrow buttons (move through on-screen options and control wireless mouse functions) Enter button (selects options and controls wireless mouse functions)

  • Page 20: Setting Up The Projector

    • Place the projector on a sturdy, level surface or install it using a compatible mount. • Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents.
  • Page 21 Front Ceiling Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system.

  • Page 22: Projection Distance

    The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings.

  • Page 23: Projector Connections

    • If your presentation or video includes sound, you can connect audio input cables, if necessary. Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly.

  • Page 24: Connecting To A Computer For Usb Video And Audio

    Connecting to a Computer for USB Video and Audio If your computer meets the system requirements, you can send video and audio output to the projector through the computer's USB port (preferably USB 2.0). Connect the projector to your computer using a USB cable.

  • Page 25: Connecting To A Computer For Vga Video

    Connecting to a Computer for USB Mouse Control If you connected your computer to a Computer or USB TypeB port on the projector, you can set up the remote control to act as a wireless mouse. This lets you control computer presentations at a distance from your computer.

  • Page 26: Connecting To A Computer For Sound

    Using the Remote Control as a Wireless Mouse Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it using the projector's USB TypeB port, you can still play sound through the projector's speaker system. Just connect an optional stereo mini-jack adapter cable (with one 3.5 mm mini-plug and two RCA plugs).

  • Page 27: Connecting To Video Sources

    Connecting to a Component-to-VGA Video Source If your video source has component video ports, you can connect it to the projector using a component- to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable.

  • Page 28: Connecting To A Composite Video Source

    Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional RCA-style video or A/V cable. 1. Connect the cable with the yellow connector to your video source's yellow video output port.

  • Page 29: Installing Batteries In The Remote Control

    1. Connect the audio cable to your video source's audio-out ports. 2. Connect the other end of the cable to the projector's Audio ports. Parent topic: Connecting to Video Sources Related references Projector Setup Settings - Extended Menu Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector.
  • Page 30 2. Insert the batteries with the + and – ends facing as shown. 3. Close the battery cover and press it down until it clicks into place. Parent topic: Setting Up the Projector...

  • Page 31: Opening The Lens Cover

    Opening the Lens Cover 1. To open the projector's lens cover, slide the A/V Mute slide lever. 2. To cover the lens or temporarily turn off the projected picture and sound, slide the A/V Mute slide cover closed. Parent topic:...

  • Page 32: Using Basic Projector Features

    Controlling the Volume with the Volume Buttons Turning On the Projector Turn on the computer or video equipment you want to use before you turn on the projector so it can display the image source. 1. Open the projector's lens cover.
  • Page 33 The projector beeps and the power light flashes green as the projector warms up. After about five seconds, the power light stops flashing and turns green. Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is especially dangerous for children.

  • Page 34: Turning Off The Projector

    2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the power light turns orange. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away.
  • Page 35 3. To transport or store the projector, make sure the power light is orange (but not flashing), then unplug the power cord. Caution: To avoid damaging the projector or lamp, never unplug the power cord when the power light is green or flashing orange.

  • Page 36: Selecting The Language For The Projector Menus

    Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Extended menu and press Enter.
  • Page 37 2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector. The foot extends from the projector. 3. Release the lever to lock the foot. 4. If the image is tilted, rotate the rear feet to adjust their height.

  • Page 38: Image Shape

    You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off to the side, you may need to correct the image shape for the best display quality.
  • Page 39 3. Press a keystone button on the projector's control panel to adjust the image shape. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape using the Keystone settings in the projector menus.

  • Page 40: Correcting Image Shape With Quick Corner

    Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.

  • Page 41: Resizing The Image With The Zoom Ring

    6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc.

  • Page 42: Focusing The Image Using The Focus Ring

    Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m) away. You can point it at the screen, or the front or back of the projector.

  • Page 43: Using The Remote Control As A Wireless Mouse

    ± 30º Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.

  • Page 44: Using The Remote Control As A Presentation Pointer

    1. Connect the projector to a computer using the projector's USB TypeB or Computer port to display video. 2. If you connected your computer to the Computer port, also connect a USB cable to the projector's USB TypeB port and to a USB port on your computer (for wireless mouse support).

  • Page 45: Selecting An Image Source

    Projector Feature Settings - Settings Menu Selecting an Image Source If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other. 1. Make sure the connected image source you want to use is turned on.
  • Page 46 • Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources. Computer port sources Video sources USB port sources Parent topic: Using Basic Projector Features...

  • Page 47: Projection Modes

    Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. • Front (default setting) lets you project from a table in front of the screen. • Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.

  • Page 48: Image Aspect Ratio

    Projection Modes Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal from your video source determines the image's aspect ratio. However, for certain images you can change the aspect ratio to fit your screen by pressing a button on the remote control.

  • Page 49: Changing The Image Aspect Ratio

    Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Aspect button on the remote control.

  • Page 50: Color Mode

    Image Quality Settings - Image Menu Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use.

  • Page 51: Available Color Modes

    4. To cycle through all the available Color Modes for your input signal, press the Color Mode button repeatedly. Parent topic: Color Mode Available Color Modes You can set the projector to use these Color Modes, depending on the input source you are using: Color Mode Presentation Dynamic Theatre...

  • Page 52: Turning On Auto Iris

    You can use the Volume buttons on the remote control to adjust the volume as you project a presentation with audio. You can also use the volume buttons on the projector's control panel. The volume buttons control the projector’s internal speaker system.
  • Page 53 2. Press the Volume buttons as necessary to lower or raise the volume. A volume gauge appears on the screen. 3. To set the volume to a specific level for an input source, you can set the volume using the projector's menus.

  • Page 54: Adjusting Projector Features

    1. Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound. 2. To turn the picture and sound back on, press A/V Mute again. Note: You can also stop projection using the A/V Mute slide lever on the projector. Parent topic:...

  • Page 55: Stopping Video Action Temporarily

    2. To restart the video action in progress, press Freeze again. Parent topic: Adjusting Projector Features Zooming Into and Out of Images You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it on the screen.

  • Page 56: Projector Security Features

    Adjusting Projector Features Projector Security Features You can secure your projector to deter theft or prevent unintended use by setting up the following security features: • Password security to prevent the projector from being turned on, and prevent changes to the startup screen and other settings.

  • Page 57: Selecting Password Security Types

    If you do not see this menu, hold down the Freeze button on the remote control for five seconds until the menu appears. 1. To prevent unauthorized use of the projector, select Power On Protect, press Enter, select On, and press Esc.

  • Page 58: Entering A Password To Use The Projector

    • If you enter an incorrect password several times in succession, the projector displays a request code and a message to contact Epson Support. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector.

  • Page 59: Saving A User's Logo Image To Display

    Saving a User's Logo Image to Display You can transfer an image to the projector and then display it whenever the projector turns on. You can also display the image when the projector is not receiving an input signal or when you temporarily stop projection (using the A/V Mute feature).

  • Page 60: Locking The Projector's Buttons

    You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter. Note: It takes a few moments for the projector to save the image; do not use the projector, its remote control, or any connected equipment until it is finished.

  • Page 61: Unlocking The Projector's Buttons

    Unlocking the Projector's Buttons Parent topic: Projector Security Features Unlocking the Projector's Buttons If the projector's buttons have been locked, hold the Enter button on the projector's control panel for seven seconds to unlock them. Parent topic: Locking the Projector's Buttons Installing a Security Cable You can install two types of security cables on the projector to deter theft.

  • Page 62: Creating A User Pattern To Display

    • Use the security slot on the back of the projector to attach a Kensington Microsaver Security system, available from Epson. • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture.
  • Page 63 You see a prompt asking if you want to use the displayed image as a User Pattern. 5. Select Yes and press Enter. Note: It takes a few moments for the projector to save the image; do not use the projector, its remote control, or any connected equipment until it is finished.

  • Page 64: Adjusting The Menu Settings

    Projector Reset Options - Reset Menu Using the Projector's Menus You can use the projector's menus to adjust the settings that control how your projector works. The projector displays the menus on the screen. 1. Press the Menu button on the control panel or remote control.

  • Page 65: Image Quality Settings - Image Menu

    2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter. 4.
  • Page 66 To change settings for an input source, make sure the source is connected and select that source. Setting Options Color Mode See the list of available Color Modes Brightness Varying levels available Contrast Varying levels available Color Saturation Varying levels available Tint Varying levels available Sharpness...

  • Page 67: Input Signal Settings - Signal Menu

    Available Color Modes Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.
  • Page 68 Setting Options Auto Setup Resolution Auto Normal Wide Tracking Varying levels available Sync. Varying levels available Position Up, down, left, right Progressive Video Film/Auto Noise Reduction Description Automatically optimizes computer image quality (when Sets the input signal resolution if not detected automatically using the Auto option.

  • Page 69: Projector Feature Settings - Settings Menu

    Parent topic: Adjusting the Menu Settings Related references Available Image Aspect Ratios Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Options Description Auto Specifies the signal type from input sources connected to...
  • Page 70 Quick Corner: select to correct image shape and alignment using an on-screen display Controls projector button locking to secure the projector Full Lock: locks all buttons Partial Lock: locks all buttons except the power button...
  • Page 71 Normal: sets maximum lamp brightness ECO: reduces lamp brightness and fan noise, and saves power and lamp life Adjusts the volume of projector’s speaker system or external speakers Limits reception of remote control signals by the selected receiver; Off turns off all receivers...

  • Page 72: Projector Setup Settings - Extended Menu

    Parent topic: Adjusting the Menu Settings Related tasks Correcting Image Shape with Quick Corner Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Options Description Pattern Display...
  • Page 73 Startup Screen: controls whether a special screen appears when the projector starts A/V Mute: selects the screen color or logo to display when A/V Mute is turned on Controls use of closed captions...

  • Page 74: Projector Information Display - Info Menu

    Language Parent topic: Adjusting the Menu Settings Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Options Description Direct Power On...
  • Page 75 Lamp Hours Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Source Displays the name of the port to which the current input source is...

  • Page 76: Projector Reset Options - Reset Menu

    Projector Lamp Specifications Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All option on the Reset menu. You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option.

  • Page 77: Maintaining And Transporting The Projector

    Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation. The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer.

  • Page 78: Cleaning The Projector Case

    Projector Maintenance Cleaning the Air Filter and Vents Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them. 1. Turn off the projector and unplug the power cord.
  • Page 79 2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush). Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it.

  • Page 80: Replacing The Air Filter

    • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged You can replace the air filter while the projector is mounted to the ceiling, if necessary. The illustrations here show the projector placed on a table.

  • Page 81: Projector Lamp Maintenance

    Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to local regulations. 4. Place the new air filter in the projector as shown and push gently until it clicks into place. 5. Close the air filter cover.

  • Page 82: Replacing The Lamp

    Projector Lamp Specifications Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour. Warning: Let the lamp fully cool before replacing it to avoid injury. You can replace the lamp while the projector is mounted to the ceiling, if necessary.
  • Page 83 4. Slide the lamp cover out and lift it off. 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.
  • Page 84 6. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
  • Page 85 7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Press the handle down. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.
  • Page 86 8. Push in the lamp firmly and tighten the screws to secure it. 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on.

  • Page 87: Resetting The Lamp Timer

    Resetting the Lamp Timer Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly. Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information.

  • Page 88: Replacing The Remote Control Batteries

    Related tasks Replacing the Lamp Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries.
  • Page 89 Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Projector Maintenance Related references Remote Control Operation...

  • Page 90: Transporting The Projector

    • Remove any equipment connected to the projector. • When transporting the projector a long distance or as checked luggage, pack it in a firm box with cushioning around it and mark the box "Fragile." • When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector.

  • Page 91: Solving Problems

    Where to Get Help Projection Problem Tips If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it If this does not solve the problem, check the following: • The lights on the projector may indicate what the problem is.
  • Page 92 Standby or sleep mode. Preparing for monitoring or shutting down. (When the light remains orange, you can unplug the projector.) Projector is too hot. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects.
  • Page 93 Flashing red Red or flashing Flashing red Flashing red Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems Related references...

  • Page 94: Using The Projector Help Displays

    Replacing the Lamp Using the Projector Help Displays You can display information to help you solve common problems using the projector's Help system. 1. Turn on the projector. 2. Press the Help button on the projector or the remote control.

  • Page 95: Solutions When No Image Appears

    • Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources. • Press the projector's power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver.

  • Page 96: Solutions When "No Signal" Message Appears

    • With Windows Media Center, reduce the screen size from full screen mode. • With Windows DirectX, turn off DirectX functions. • Turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer. Parent topic:...

  • Page 97: Displaying From A Mac Laptop

    • Make sure the correct input signal is selected on the Signal menu. • Make sure the computer's display resolution does not exceed the projector's resolution and frequency limit. If necessary, select a different display resolution for your computer. (See your computer manual for details.)

  • Page 98: Solutions When The Image Is Not Rectangular

    If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. • If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape.

  • Page 99: Solutions When The Image Is Fuzzy Or Blurry

    • Adjust the image focus. • Clean the projector lens. Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Position the projector close enough to the screen.

  • Page 100: Solutions When The Image Brightness Or Colors Are Incorrect

    Contrast, Tint, Color Adjustment, and/or Color Saturation. • Make sure you selected the correct input source on the Signal menu. • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables.

  • Page 101: Solving Projector Or Remote Control Operation Problems

    • If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer. Parent topic: Solving Image or Sound Problems Solving Projector or Remote Control Operation Problems Check the solutions in these sections if you have problems operating the projector or remote control.

  • Page 102: Solutions To Problems With The Remote Control

    • If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson. • If you lose the remote control you cannot enter a password. Order a new one from Epson. Parent topic:...
  • Page 103 To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it's free. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period.

  • Page 104: Technical Specifications

    Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supported Video Display Formats USB Display System Requirements...
  • Page 105 Brightness VS350W: Normal Power Consumption mode: White light output 3700 lumens (ISO 21118 standard) Color light output 3700 lumens ECO Power Consumption mode: White light output 2960 lumens (ISO 21118 standard) VS410: Normal Power Consumption mode: White light output 4000 lumens (ISO 21118 standard)

  • Page 106: Projector Lamp Specifications

    Type Power consumption Lamp life Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time. Parent topic: Technical Specifications...

  • Page 107: Projector Dimension Specifications

    Projector Dimension Specifications Height (excluding feet) Width Depth Weight Parent topic: Technical Specifications Projector Electrical Specifications Rated frequency Power supply Power consumption (100 to 120 V) Power consumption (200 to 240 V) Parent topic: Technical Specifications 3.66 inches (93 mm) 15.6 inches (345 mm)

  • Page 108: Projector Environmental Specifications

    For best results, your computer monitor or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
  • Page 109 Display format Refresh rate (in Hz) 60/70/75/85 WXGA 60/75/85 SXGA 70/75/85 60/75/85 60/75/85 SXGA+ 60/75 WXGA+ 60/75/85 UXGA WSXGA+* WUXGA (Reduced Blanking) MAC13" MAC16" MAC19" MAC21" Composite video TV (NTSC) TV (PAL) 50/60 TV (SECAM) Component video SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) Resolution (in pixels)

  • Page 110: Usb Display System Requirements

    ** Available only when using the Wide option as the Resolution setting Parent topic: Technical Specifications USB Display System Requirements Your computer system must meet the system requirements here to use the projector's USB Display software. Refresh rate (in Hz) Resolution (in pixels) 50/60 1280 ×...
  • Page 111 Requirement Windows Operating system Windows 2000 (Service Pack 4 only) Windows XP Professional, Home Edition, and Tablet PC Edition (32-bit); except for Service Pack 1 Windows Vista Ultimate, Enterprise, Business, Home Premium, and Home Basic (32-bit) Windows 7 Ultimate, Enterprise, Professional, and Home Premium (32- and 64-bit);...

  • Page 112: Notices

    Caution: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you.
  • Page 113 • Do not place the projector on an unstable cart, stand, or table. • Do not operate the projector on its side, or while tilted to one side. Do not tilt the projector more than 30° forward or back. • If the projector is mounted on a ceiling or wall, it should be installed by qualified technicians using mounting hardware designed for use with this projector.
  • Page 114 • Do not use the projector where it may be exposed to smoke, corrosive gases, or excessive dust. • Do not use or store the projector or remote control in a hot location, such as near a heater, in direct sunlight, or in a closed vehicle.

  • Page 115: Fcc Compliance Statement

    • Do not disassemble the lamp or subject it to impacts. • Do not place the source of an open flame, such as a lit candle, on or near the projector. • Do not block the lens during projection using a book or any object other than the lens cover. Use the lens cover to temporarily stop projection, but avoid projecting with the lens cover closed for a long period.

  • Page 116: Trademarks

    Accolade trademarks; and Epson Store General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. Parent topic: Notices Copyright Notice All rights reserved.

  • Page 117: Copyright Attribution

    Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third...

This manual is also suitable for:

Vs410

Table of Contents