Reset - Cobra 75 All Road Owner's Manual

Menus
Intro Operation Customer Audio Routing
-MENU-
Assistance
KEY TONE AUDIO ROUTING determines where receiver audio can be heard.
AUDIO ROUTING
There are 3 options:
TX NR
1. BT SPK ONLY - sound will come from the handset or wireless
RX NR
Customer
Installation
headset
Assistance
2. EXT SPK ONLY - sound will come from an optional external
Secondary Icons
speaker (sold separately and requires additional installation)
3. BT & EXT - sound will be routed from the handset or wireless
headset + an external speaker (at the same time)
Notice Caution
You will only change this setting for options 2 and 3 (your All Road
defaults to option 1). To change audio routing:
1. Press and hold the ENT/MENU button on the All Road
handset to active the MENU
2. Use the DOWN arrow to select AUDIO ROUTING from the
Menu Options
3. Use the UP or DOWN buttons select the audio path, press
ENT to select
4. Press the ESC button to get back to the home screen
TX NR (OFF - Level 05)
-MENU-
KEY TONE TX NR stands for Transmitter Noise Reduction and is a Digital Signal
AUDIO ROUTING
Processing feature of this radio. Enabling this feature will help
TX NR
further reduce background noise that the Handset microphone will
RX NR
pick up in a typical moving vehicle and send to the person on the
other end. For the person on the receiving end, they will be able to
hear your voice transmission more clearly from the All Road.
For transmit noise reduction, the higher the level the greater the
noise reduction. This should be used depending on the environment
(noise level inside the vehicle). In a quiet environment, TX NR (or
DSP) is not needed. To adjust Transmit DSP:
1. Press and hold the ENT/MENU button on the All Road
handset to active the MENU
2. Use the UP button to select TX NR from the Menu Options
3. Use the UP or DOWN buttons select the Transmit DSP
level, press ENT to select
4. Press the ESC button to get back to the home screen
NOTE: Use TX NR setting to help reduce the background noise for
better speech intelligibility at the other CB radio station.
16
Warranty
Warning
Menus
Intro Operation RX NR (OFF - Level 05) Customer
-MENU-
Assistance
KEY TONE
RX NR stands for Receiver Noise Reduction. Enabling this feature
AUDIO ROUTING
will help to reduce radio noise sources picked up by the All Road
TX NR
receiver and improve the ability to clearly hear the voice of the
RX NR
Customer
Installation person transmitting from the other end. RX NR works differently
Assistance
than TX NR where RX noise is environmentally created as a result
Secondary Icons
of band conditions resulting in a lower signal-to-noise ratio,
reducing speech intellibility. Adjusting RX NR or Receiver DSP will
help to improve speech intelligibility and increase the signal to
noise ratio that can greatly enhance the CB radio two-way
Notice Caution
communications experience. To adjust RX DSP:
1. Press and hold the ENT/MENU button on the All Road
handset to active the MENU
2. Use the UP button to select RX NR from the Menu Options
3. Use the UP or DOWN buttons select the Receive DSP level,
press ENT to select
4. Press the ESC button to get back to the home screen
NOTE: The level of DSP selected is based on personal preferences.
Start on level 1 setting and listen to the current activity on the
selected CB channel. If needed, increase the DSP level until an
optimum setting is achieved or as desired. There are times when
the CB band is fairly quiet. In those instances it may be more
desirable to disable RX NR.
Reset (YES / NO)
-MENU-
TX NR
RESET restores the 75 All Road factory to default settings.
RX NR
To reset the 75 All Road:
INFORMATION
1. Press and hold the ENT/MENU button on the All Road

RESET

handset to active the MENU
2. Use the UP button to select RESET from the Menu Options
3. Select YES using theUP or DOWN button, press ENT to
select
4. "RESET CB" appears. Select YES using the UP or DOWN
arrow button, press ENT to select
5. "RESET CB PLEASE WAIT" appears and the 75 All Road CB
is reset to its original settings
Warranty
Warning
17