Wx Alert; Wx Alert Scan; Wx Auto Scan; Display Mhz - Cobra 75 All Road Owner's Manual

Menus
WX Auto Scan (ON / OFF)
Intro Operation Customer
-MENU-
Assistance
TIME OUT TIMER
WX AUTO SCAN when enabled will look for and lock on to the

WX ALERT

strongest weather station signal. This happens in the background

WX ALERT SCAN

and is useful for cross-country travel. To enable/disable WX AUTO

WX AUTO SCAN

Customer
SCAN:
Installation
Assistance
1. Press and hold the ENT/MENU button on the All Road handset
Secondary Icons
to active the MENU
2. Select WX AUTO SCAN from the Menu Options
3. Use the UP or DOWN arrow to select ON or OFF, press ENT to
select
Notice Caution
4. Press the ESC button to get back to the home screen
Display MHz (ON / OFF)
-MENU-

DISPLAY MHz

Displays the frequency of the current CB or weather channel.

AUTO POWER

To turn DISPLAY MHz ON or OFF:

BACKLIGHT

1. Press and hold the ENT/MENU button on the All Road handset

CONTRAST

to active the MENU
2. Use the DOWN arrow to DISPLAY MHZ from the Menu Options
3. Use the UP or DOWN arrow to select ON or OFF, press ENT to
select
4. Press the ESC button to get back to the home screen
Auto Power (ON / OFF)
-MENU-
DISPLAY MHz
When Auto Power is enabled, it allows the radio to turn itself on
AUTO POWER
when power is restored from the vehicle. When AUTO POWER is
BACKLIGHT
set to OFF, the radio will need to be manually powered ON when
CONTRAST
the vehicle is started up. To adjust the AUTO POWER setting:
1. Press and hold the ENT/MENU button on the All Road handset
to active the MENU
2. Use the DOWN arrow to select AUTO POWER from the Menu
Options
3. Use the UP or DOWN arrow to select ON or OFF, press ENT to
select
4. Press the ESC button to get back to the home screen
NOTE: This feature only works if the radio is left ON when the
vehicle is turned off. If the radio is OFF when power is cut from the
radio (when you turn your vehicle off), your radio will not automati-
cally turn ON, even when AUTO POWER is enabled.
14
Warranty
Warning
Menus
Intro Operation Customer Backlight (OFF - High)
-MENU-
Assistance
DISPLAY MHz
The purpose of display backlight is to increase readability. To
AUTO POWER
adjust the backlight:
BACKLIGHT
1. Press and hold the ENT/MENU button on the All Road
CONTRAST
Customer
Installation
Assistance handset to active the MENU
2. Use the DOWN arrow to select BACKLIGHT from the Menu
Secondary Icons
Options
3. Use the UP or DOWN arrow to increase or decrease the
backlight, press ENT to select
Notice Caution 4. Press the ESC button to get back to the home screen
-MENU-
Contrast (OFF - High)
DISPLAY MHz
Contrast adjusts the brightness of the backlight. To find the right
AUTO POWER
contrast setting:
BACKLIGHT
1. Press and hold the ENT/MENU button on the All Road
CONTRAST
handset to active the MENU
2. Use the DOWN arrow to select CONTRAST from the Menu
Options
3. Use the UP or DOWN arrow to increase or decrease the
contrast, press ENT to select
4. Press the ESC button to get back to the home screen
Key Tone (ON / OFF)
-MENU-

KEY TONE

KEY TONE is an option to have key tone sounds when the buttons

AUDIO ROUTING

are pressed. To enable/disable:

TX NR

Instructions:

RX NR

1. Press and hold the ENT/MENU button on the All Road
handset to active the MENU
2. Use the DOWN arrow to select KEY TONE from the Menu
Options
3. Use the UP or DOWN arrow to turn ON or OFF, press ENT to
select
4. Press the ESC button to get back to the home screen
Warranty
Warning
15