1. Manuals
  2. Brands
  3. UeeVii Manuals
  4. Network Hardware
  5. CPE452
  6. User manual

UeeVii CPE452 User Manual

Wireless bridge
Hide thumbs

Advertisement

Table of Contents

Model: CPE452
Tips:
Thank you for ordering and using UeeVii Wireless Bridge, please read the
manual carefully before use. If there are any problems during the use, please
contact us in time.
The installation of this device requires some network knowledge. If you can't
install it, please let us know or contact a professional.
Customer Service Email: support@ueevii.com

Advertisement

Table of Contents
loading

Related Manuals for UeeVii CPE452

Summary of Contents for UeeVii CPE452

  • Page 1 Model: CPE452 Tips: Thank you for ordering and using UeeVii Wireless Bridge, please read the manual carefully before use. If there are any problems during the use, please contact us in time. The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional.
  • Page 2 The working data link layer realizes the interconnection of local area networks. The transmission distance can reach up to 3km. CPE452 Video Bridge Transmission usually consists of two devices in AP and Client mode respectively. On the Client-side (Receiving side) CPE connects with IP Camera, at the AP side (Transmitting side) CPE connects with a video recorder.

  • Page 3: Package List

    Package List: 2 * CPE452 Wireless Bridge 2 * POE Adapter (24V) 2 * Network Cable 2 * Metal Hoop 1 * User Manual Details Part...

  • Page 4: Detailed Description

    Detailed Description Item Description WLAN is solid red light indicates successful pairing, WLAN Signal LED 4 grid green signal strength display LAN1/LAN2 When LAN1 and LAN2 are connected is solid. Power indicator, red LED solid is normal Digital tube display "H" indicates in manual configuration Digital Tube status Digital tube display "L"...
  • Page 5 1.The LAN port of the PoE power supply is connected to the PC, router, and switch. 2.According to the requirements, prepare a long enough network cable （ Recom mended within 20 meters, must Cat 5e or up） to connect the wireless bridge and the PoE power supply.

  • Page 6: Pairing Guide

    Pairing Guide A. Point to Point Pairing Step: 1. Switch one unit to A (Master Bridge) and one unit to B(Slave Bridge); 2. Connect the POE to each unit using the Ethernet cable and plug the POE in; 3. Wait for them to power up, about 2 min; 4.

  • Page 7: Installation

    1. Place the CPE to the selected position and adjust the CPE front panel orientation to be approximately the same as the selected direction, then use the ties to fix the CPE, the bracket is not included in the package. Recommended UeeVii Universal Bracket (ASIN: B09NLLG8MZ).

  • Page 8: Wifi Function

    WiFi Function 1. The WiFi function is turned on by default for the master bridge. WiFi SSID: CPE5G-5GXXX WiFi PWD: zllinkcpe123456XXX XXX represents different channels, please refer to the comparison table in the user manual. 2. You can access the wireless bridge through your computer to set the SSID and new WiFi password.
  • Page 9 Case 4: Point-to-point extended surveillance cameras range Note: You can work the wireless bridge without advanced settings 1. Computer Access Wireless Bridge, connect the CPE to the computer Refer to the figure left to connect the CPE to the computer through a PoE adapter and an Ethernet cable.
  • Page 10 2. Modify your computer's IP address, make your computer's IP and the bridge's IP address be on the same network segment(LAN) so that you can access them. Step 1: Find and open "Open Network and Sharing Center" on your computer. Tips：...
  • Page 11 4. On the login screen, the default user name and login password of the wireless bridge is "admin", just entry password login. Note: “admin” is not the password of the WiFi SSID, it is just the password for WEB access. 5.Login successful, go to setting.

  • Page 12: Specifications

    192.168.255.212 192.168.255.112 CPE5G_5G124 zllinkcpe123456124 192.168.255.213 192.168.255.113 CPE5G_5G116 zllinkcpe123456116 192.168.255.214 192.168.255.114 CPE5G_5G108 zllinkcpe123456108 192.168.255.215 192.168.255.115 zllinkcpe123456100 CPE5G_5G100 Specifications UeeVii Brand Model CPE452 FCC ID 2A6EJ-CPE450 AR9344 DRAM DDR2 64Mbyte, Flash: 8Mbyte Interface 10/100Mbps LAN*2 11a: 54M,48M,36M,24M,18M,12M,9M,6Mbps 11n:7.2M,14.4M,21.7M,28.9M,43.3M,57.8M,65M,72.2M,14.4M, Data rate 28.9M,43.3M,57.8M,86.7M,115.6M,130M,144.4Mbps...

  • Page 13: Troubleshooting

    Direct Sequence Spread Spectrum(DSSS) Transfer method OFDM/BPSK/QPSK/CCK/DQPSK/DBPSK Modulation Protocol standard IEEE802.11ac IEEE802.11n,IEEE802.11a , IEEE802.3u Agreement CSMA/CA,TCP/IP,IPX/SPX,NetBEUI,DHCP,NDIS3,NDIS4,NDIS5 Frequency Range 5180.0~5240.0Mhz, 5745.0~5825.0Mhz Power ≤3W, POE 24V~1A/48V~0.5A,DC 12V~1A Antenna 14dBi,Horizontal 60°/Vertical 30° Support WEP GUI Support Telnet Serial Support WEP 64/128bits,WPA,WPA2,802.1x Safety Temperature -30～65℃...
  • Page 14 1. Make sure the wireless bridge is connected to the computer and the 1. LAN connection or network cable is of good quality. ethernet cable has a 2. Set the computer's local IPv4 problem address to the same LAN as the Can't access from 2.

  • Page 15: Technical Support And Service

    Technical Support and Service Thank you for your order and for using UeeVii Wireless Bridge, please read the manual carefully before use. If there are any problems during the use, please contact us in time. Tech Service Email: support@ueevii.com e.g.

Table of Contents

Save PDF