Advertisement
Table of Contents
WIRELESS BRIDGE
Tips:
Thank you for ordering and using UeeVii CPE820 Wireless Bridge,
please read the manual carefully before use. If there are any
problems during the use, please contact us in time.
The installation of this device requires some network knowledge. If
you can't install it, please let us know or contact a professional.
Customer Service Email: support@ueevii.com
USER MANUAL
Model: CPE-820
Advertisement
Table of Contents
Related Manuals for UeeVii CPE-820
Summary of Contents for UeeVii CPE-820
- Page 1 USER MANUAL Model: CPE-820 Tips: Thank you for ordering and using UeeVii CPE820 Wireless Bridge, please read the manual carefully before use. If there are any problems during the use, please contact us in time. The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional.
- Page 2 OVERVIEW 1. Introduce UeeVii CPE820 is a long-distance 5.8G wireless transmission device. It uses wireless communication technology to transmit network data using air as a medium to perform long-distance point-to-point or point-to-multipoint inter connection. The working data link layer realizes the interconnection of local area networks.
-
Page 3: Specifications
10. Dynamic MIMO power saving mode (DMPS) and APSD； 11. Support 24V POE power supply, easy to install and deploy； 12. Support WEB GUI access management device. 3. Specifications Brand UeeVii Model CPE-820 7620A+7612E+IP1001 Flash 8MByte DRAM DDR2 64MByte Interface 10/100/1000Mbps LAN*1 &... -
Page 4: Package Included
A-B Button: Pushing the button to "A" indicates that the bridge acts as the master bridge (transmitter), and pushing the button to "B" indicates that the bridge acts as the slave bridge (receiver). support@ueevii.com... -
Page 5: Led Indicator Details
Display that a fixed number is solid, it means that the two by a P Digital Tube bridges are paired successfully and are working. cable supp Point Light A, B status lights, lighting is B mode, no lighting is A mode. cable support@ueevii.com... -
Page 6: Quick Start
7. Finally connect other devices(Router, PC, Switch) and install them to the o does not require a DC power target location. he DC power adapter and e not included in the package. support@ueevii.com... -
Page 7: Installation
fix the CPE, the bracket is not included in the package. Recommended UeeVii Universal Bracket (ASIN: B09NLLG8MZ). 2. Please, prepare a long enough network cable to connect the PoE adapter and CPE, the network cable is connected to the LAN port of the CPE, and the other end is connected to the PoE port of the PoE adapter. -
Page 8: Wifi Function
XXX represents different channels, please refer to the comparison table in the user manual. 2. You can access the wireless bridge through your computer to set the SSID and new WiFi password. Please refer to the advanced settings section. support@ueevii.com... -
Page 9: Application Case
6.2 Case 2: Point-to-point extended of surveillance cameras range Master Bridge Slave Bridge IP Camera Computer Switch IP Camera IP Camera 6.3 Case 3: Point-to-multiple point extended surveillance cameras range Slave Bridge IP Camera Master Bridge Computer IP Camera 60° IP Camera IP Camera support@ueevii.com... -
Page 10: Advanced Settings
You can enable the device without advanced settings. Computer Access 1. Connect the CPE to the computer Refer to the figure left to connect the CPE to the computer through a PoE adapter and an Ethernet cable. POE Charger 100M port 1000M port support@ueevii.com... - Page 11 IP of the CPE), then entry IP address is 192.168.188.xxx, subnet mask is 255.255.255.0(Autofill), Default gateway is 192.168.188.xxx, Preferred DDS server 192.168.188.xxx. You can use 192.168.188.2(xxx=2) in the reference picture to set. 192.168.255.105 support@ueevii.com...
- Page 12 “admin” is not the password of the WiFi SSID, it is just the password for WEB access. 5. Login successful, go to setting. 6. In the wireless settings, turn off "Hide SSID", then modify the SSID name and WiFi password, and finally click "Apply" to complete the setting. support@ueevii.com...
- Page 13 Digital & IP & WiFi Correspondence Chart You can check the SSID and password through this chart. （Ps:In this chart, SSIDs and Passwords are the default.） support@ueevii.com...
-
Page 14: Troubleshooting
IP Can not login WEB 3. LAN connection or address ethernet cable has a 3. Check LAN connection problem and Ethernet cable 4. Too much cookie, 4. Clear cookie, run arp-d MAC address haven't to clear MAC address update support@ueevii.com... - Page 15 1. Static electricity 2. Running time over 2. Running time too Device always 7 days,reboot it long dead 3. After lightning, device 3. Lightning stroke PoE port broken or unstable better to deploy lightning conductor support@ueevii.com...
-
Page 16: Technical Support And Service
Technical Support and Service A. Thank you for your order and for using UeeVii Wireless Bridge, please read the manual carefully before use. If there are any problems during the use, please contact us in time; B. The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional.