Installing The Pen Batteries - Epson BrightLink Solo Interactive Module IU-01 User Manual

Interactive unit

Hide thumbs Also See for BrightLink Solo Interactive Module IU-01:

Table of Contents

Installing the Pen Batteries

Before you can use the pen, you need to install the batteries. To check the

batteries, press the button on the pen. If the indicator light is green, the

batteries have enough power.

If you need to install or replace the batteries, use two alkaline AAA

batteries.

Press in the tab on the battery cover as you lift the cover off.

Install two batteries, inserting the + and - ends as shown.

Replace the battery cover and press it down until it clicks into

place.

p.9

Table of Contents

Do you have a question about the BrightLink Solo Interactive Module IU-01 and is the answer not in the manual?

Elpiu01