Attaching A Security Cable - Epson BrightLink 475Wi Installation Manual

8 Appendix
Using the Easy Interactive Function (BrightLink models only)
After you install a BrightLink model, you need to perform calibration to align the positions of the cursor and
interactive pens.
In order to use the Easy Interactive Tools software, you must first install the software on the computer. Mac OS
X users also need to install a driver that enables the pen to work. Both software programs are included with
the BrightLink projector.
For details, see User's Guide on the BrightLink 475Wi/480i/485Wi CD or at one of the following:
U.S.: epson.com/support/brightlinkdownloads
Canada: epson.ca/support/brightlinkdownloads

Attaching a Security Cable

If the projector is to be installed in a room where it will be left unattended, you can use a commercially
available theft-prevention wire lock to secure the projector to a post or other object to prevent someone from
taking it.
Pass the wire for the theft-prevention wire lock through the security cable installation point.
For details on how to lock the wire lock, refer to the User's Guide supplied with the wire lock.
After installation of the projector is complete, make sure you leave the remote control,
batteries, CDs, and PrivateLine card in the room with the projector. For BrightLink, also leave
the pens, batteries, pen tray, battery charger, and Welcome Kit folder in the room with the
projector.
42