Attaching A Security Cable - Epson BrightLink 710Ui Installation Manual

7. Use the arrow buttons on the remote control or control panel to change the shape of the selected area.
8. Repeat steps 6 and 7 to adjust any additional areas.

Attaching a Security Cable

If the projector is to be installed in a room where it will be left unattended, you can use a commercially
available theft-prevention wire lock to secure the projector to a post or other object to prevent someone from
taking it.
Pass the wire for the theft-prevention wire lock through the security cable installation point.
For details on how to lock the wire lock, refer to the User's Guide supplied with the wire lock.
Make sure you leave the remote control, batteries, interactive pen(s), pen batteries, pen tray,
and battery charger in the room with the projector. If your projector came with a product-
specific installation guide or an installation leave-behind list, use that list instead of this one.
The accessories included with the projector vary by model and region.
43