About This Installation Guide - Epson BrightLink 475Wi Installation Manual

V11h453520w interactive projector with mount
Hide thumbs Also See for BrightLink 475Wi:
Table of Contents

Advertisement

Available languages

Available languages

When you mount the projector on the wall with the wall mount, the wall requires enough strength to hold
the projector and the wall mount.
This wall mount should be installed on a concrete wall. Confirm the weight of the projector and the wall
mount before installation, and maintain the strength of the wall. If the wall is not strong enough, reinforce
the wall before installation.
Inspect the wall mount on a regular basis to ensure there are no broken parts or loose screws.
If there are any broken parts, stop using the wall mount immediately. If the wall mount or projector falls, it could
cause personal injury or property damage.
Never modify the wall mount.
Do not hang on the wall mount or hang a heavy object on the wall mount.
If the projector or wall mount falls, it could cause personal injury or property damage.
Do not use adhesives, lubricants, or oils to install or adjust the wall mount. If you use adhesives to prevent the
screws from loosening or things such as lubricants or oils on the part of the projector attached to the slide plate,
the case may crack and cause the projector to fall, resulting in personal injury or property damage.
Tighten all screws firmly after adjustment.
Otherwise, the projector or wall mount may fall and cause personal injury or property damage.
Never loosen the bolts and nuts after installation.
Confirm that the screws have not become loose on a regular basis. If you find any loose screws, tighten them
firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage.
When performing wiring, make sure the cable does not come into contact with any screws or bolts.
Handling the cable incorrectly may cause fire or electric shock.
Do not install the wall mount in a location where the operating temperature for your projector model may
be exceeded. Such an environment may damage the projector.
Install the wall mount in a place free from excessive dust and humidity to prevent the lens or optical
components from becoming dirty.
Do not use excessive force when adjusting the wall mount.
The wall mount may break, resulting in personal injury.
Location
Before installing the projector, verify the power supply wiring for the installation location.
Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some
kinds of fluorescent lights could interfere with the remote control of the projector.
Install the projector away from direct sunlight and other bright light sources.
It is recommended to keep VGA computer cable length less than 65 ft (20 meters) to reduce external
noise.

About This Installation Guide

This guide describes how to mount the ultra-short-throw projectors BrightLink 475Wi/480i/485Wi and
PowerLite 470/475W/480/485W to a wall using the included EPSON wall mount.
Warning
Caution
3

Advertisement

Table of Contents
loading

Table of Contents