Fire Extinguisher Holder And Cover - Yamaha FX HO 2019 Owner's/Operator's Manual

Waverunner
Table of Contents

Advertisement

Equipment operation
To open the removable watertight storage
compartment:
(1) Remove the rear seat. (See page 48 for
seat removal and installation proce-
dures.)
(2) Loosen the cap and remove it.
1
1 Cap
1
1 Removable watertight storage compart-
ment
Removable watertight storage compart-
ment:
Capacity:
9.0 L (2.4 US gal, 2.0 Imp.gal)
Load limit:
3.0 kg (7 lb)
To close the removable watertight storage
compartment:
(1) Securely install the cap by tightening it
until it stops.
(2) Securely install the rear seat in its original
position.
54
EJU42391

Fire extinguisher holder and cover

The fire extinguisher holder and cover are lo-
cated in the bow storage compartment.
To use the fire extinguisher holder and cover:
(1) Pull the hood latch rearward, and then lift
up the rear of the hood.
1 Hood latch
(2) Unhook the band and remove the fire ex-
tinguisher cover.
1 Fire extinguisher holder and cover
2 Band
(3) Place the fire extinguisher in the holder,
and then place the cover over the fire ex-
tinguisher.
(4) Securely fasten the cover and the fire ex-
tinguisher with the band.
(5) Push the rear of the hood down to se-
curely lock it in place. Make sure that the
1
1
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fx cruiser ho 2019

Table of Contents