Johnson Controls UNT110-1 Manual page 71

Defining a UNT
Control Device
in Companion
or Facilitator
Software
Table 28 explains the blank attribute fields. The Operator Workstation
User's Manual (FAN 634) describes the general procedures for entering
and modifying data.
Table 28: Blank UNT Object Attributes
Attribute
Object Name
Expanded ID
9. On the Item menu, select Save to save the new UNT object and add
the object to the NCM database.
10. Upload the NCM to make an archive copy of the new object. Refer to
Uploading from the NCM in the Operator Workstation User's Manual
(FAN 634).
To define a UNT control device in Companion, refer to the Metasys
Companion Technical Manual (FAN 628.1). To define a UNT control
device in Facilitator, refer to the Facilitator FMS Technical Manual
(FAN 1628.1)
Description
Identifies the object
(i.e., UNT1). The object
name cannot be duplicated
in the system.
Further identifies the object
(i.e., Garage Level Heater)
UNT Controller—Unitary (UNT) Controller 71
Entry Values . . .
1 to 8 alphanumeric
characters
0 to 24 alphanumeric
characters
(optional)