Lantronix X304 Quick Start Manual

X304 Quick Start Guide
!
Thank you for choosing Lantronix. Please register your product to receive notifications for firmware and
documentation updates at www.lantronix.com/product-registration.
X304
HARDWARE OVERVIEW
Ethernet LAN
DC input
Wi-Fi antenna
HARDWARE SETUP
1. Unbox and verify the contents.
2. To insert the optional SIM card, press the yellow SIM tray button (using a pen
tip or other similar object) to eject the SIM tray. Place the SIM card on the
SIM tray in the correct orientation. Gently push the SIM tray back into the
SIM slot. Note: Activate the SIM according to the vendor's instructions.
3. Attach the cellular antenna to its connectors and tighten it securely.
4. Attach the Wi-Fi / Bluetooth antennas to their connectors and tighten them
securely.
5. Connect the accessory power adapter; attach the 3-pin plug to the DC input
the device side and the other end to the power outlet.
6. Wait for the device to boot. The green POWER LED light will be on.
WHAT'S IN THE BOX
guides
Quick
Start
LEDs
Front View
Reset RS-232/485
Wi-Fi / Bluetooth
antenna
Accessory
Power cord
Cellular antenna
Wi-Fi / Bluetooth antenna
SIM
Insert
For additional accessories, visit
https://www.lantronix.com/products/x300-series/
Cellular diversity
antenna
1
IoT Cellular Gateway
Part number
ACC-520-0165-00
A33M0
A21H0
Back View
microSD card
Optional
mini-SIM slot (not provided) slot
GNSS antenna
One embedded SIM is provided.
LEDs
ALERT Red Device alert
Activity Amber Cellular data activity
Network Amber Cellular network status
Signal Amber Cellular signal strength
- On: Embedded SIM in use
SIM Blue - Blink: External SIM in use
- Off: SIM not in use
Wi-Fi Blue Wi-Fi network status
POWER Green Power
(See X300 User Guide for details.)
quantity
1
1
2
SIM 1
Cellular main
antenna