Planet Networking & Communication SGS-5240 Series User Manual page 98


MST Interface
Switch Management > STP > MSTP> MST Interface page is used to configure the STA interface settings for an MST instance.
◆MST ID – Instance identifier to configure. (Default: 0)
◆Interface – Displays a list of ports or groups.
◆STA Status – Displays the current state of this interface within the Spanning Tree.

Discarding – Port receives STA configuration messages, but does not forward packets.

Learning – Port has transmitted configuration messages for an interval set by the Forward Delay parameter without
receiving contradictory information. Port address table is cleared, and the port begins learning addresses.
User's Manual of SGS-5240 Series Managed Switch
98