Epson Stylus Pro 7700 Quick Reference Manual page 11

Control Panel Menus (continued)
PAPER SETUP ROLL PAPER REMAINING
PAPER TYPE
CUSTOM PAPER
HEAD ALIGNMENT PAPER THICKNESS
ALIGNMENT
NETWORK SETUP
OPTIONS SETUP
REMAINING PPR SETUP
ROLL PAPER LENGTH
ROLL LENGTH ALERT
PAPER TYPE
PLATEN GAP
THICKNESS PATTERN
PAPER FEED ADJUST
DRYING TIME
PAPER SUCTION
SET ROLL PAPER TENSION
REMOVE SKEW
SELECT PAPER TYPE
SELECT THICKNESS
AUTO
MANUAL
NETWORK SETUP
IP ADDRESS SETTING
IP, SM, DG SETTING
BONJOUR
INIT NETWORK SETTING
TAKE-UP REEL
Setting appears only when no paper is loaded
OFF, ON
From 15 to 300 ft
From 4 to 50 ft
Media type loaded in the printer
Paper No 1 to 10
Photo, Matte, Plain, Others
STANDARD, NARROW, WIDE, WIDER
PRINT
-0.70% to 0.70%
0.0 sec. to 10.0 sec.
STANDARD, -1, -2, -3, -4
STANDARD, HIGH, HIGHER
ON, OFF
Media type loaded in the printer.
8 mil (0.2 mm), 4 mil to 60 mil (0.1 to 1.5 mm)
UNI-D, BI-D 2-COLOR, BI-D ALL, BI-D #1, BI-D #2, BI-D #3, BI-D #4
UNI-D, BI-D 2-COLOR, BI-D ALL
DISABLE, ENABLE
AUTO, PANEL
IP address, subnet mask, default gateway
ON, OFF
Resets all network settings
Displays version of the take-up reel installed (Pro 9700 only)
10