Epson Stylus Photo 1200 User Manual page 9

Using an improperly
shielded USB cable—
especially a cable
more than 6.5 ft.
(2 meters) long—may
cause the printer to
malfunction.


     
To use your printer and its software with a PC, your system should have:
An IBM compatible PC with at least a 486/25 MHz (for Windows 95 or
®
Windows NT 4.0), or 486/66 MHz (for Windows 98) processor
®
Microsoft Windows 95, Windows 98, or Windows NT 4.0
At least 16MB of RAM (32MB for Windows 95 or 98 or 64MB for
Windows NT 4.0 recommended)
At least 50MB of free hard disk space (100MB recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed (2x) CD-ROM drive—quad-speed (4x) or faster
recommended—for installing the printer software
For parallel connection, a high-speed, bidirectional, IEEE-1284
compliant parallel cable (6 to 10 feet long). The cable must have a
D-SUB, 25-pin, male connector for your computer and a 36-pin,
Centronics compatible connector for the printer.
®
For USB connection to a computer with Windows 98 and a
Windows 98 compliant USB port, a shielded USB "AB" interface cable,
from Series A (computer) to Series B (printer) up to 6.5 ft. (2 meters)
long.