Epson Stylus Photo 1200 User Manual page 58

To delete a custom
watermark from the list,
click the User Defined
button, select the
watermark, and click
Delete.
The on-screen
graphic changes to
reflect all the settings
you choose. If your
monitor displays only
16 colors, the
Intensity adjustments
are not shown in the
Layout graphic.

  
Click the Browse button. You see a file selection dialog box. Navigate
to the folder containing the bitmap file you want to use, select the file,
and click OK.
Type a name for the custom watermark (up to 24 characters long) in
the Watermark field. Click the Save button to add it to the list, then
click OK.
The custom watermark now appears as the selected watermark in the
Watermark Settings dialog box and is shown in the on-screen graphic.
6 Select the way you want the watermark to appear by choosing the
following options:
Position selects where you want the watermark to appear on your
page: Center, Top-Left, Top-Center, Top-Right, Left, Right,
Bottom-Left, Bottom-Center, or Bottom-Right.
Size adjusts the size of the watermark, either larger or smaller, as
you move the slide bar.
Color lets you choose a color for your predefined watermark:
Black, Blue, Aqua, Lime, Fuchsia, Red, or Yellow. You cannot
select a color for a custom watermark; it is printed in its original
colors.
Intensity sets the lightness or darkness of the watermark based on
where you move the slide bar.
7 If you're finished changing Layout options, click OK to close the Layout
dialog box.