Epson Stylus Photo 1200 User Manual page 117

Never turn off the
printer while the
P power light is
flashing, unless the
printer hasn't moved
or made any noise for
more than 5 minutes.
      #  

   2   
$
Follow these steps to run the Head Cleaning utility:
1 Make sure the printer is turned on but not printing, and both the
B black and A color ink out lights are off.
2 Start an application and open a document.
3 Access the printer settings dialog box as described in
Windows or Printing from a
4 Click the Utility tab (Windows) or the
You see the Utility menu.
5 Click the Head Cleaning icon.
6 Follow the instructions on the screen to clean the print head. Cleaning
takes a little over a minute, during which the printer makes some noise
and the P power light flashes.
When the P power light stops flashing, run a nozzle check to test the
results and reset the cleaning cycle.
7 Make sure paper is loaded in the printer and click Print nozzle check
pattern (Windows) or Confirmation (Macintosh). Then click Next. The
nozzle check pattern prints on your printer; see
Check Pattern for details.
8 If the nozzle check pattern is filled in completely, click Finish.
If the pattern is missing dots, click Clean to clean again. If you don't
see any improvement in the print quality after cleaning two or three
times, check the solutions in
Macintosh.
Utility icon (Macintosh).
Examining the Nozzle
Improving Print Quality.
Printing from