Epson Stylus Photo 1200 User Manual page 129

The printed image has horizontal banding
Possible cause
The Media Type setting
doesn't match the
loaded paper.
The printable side of
the paper is face down.
The print head nozzles
are clogged.
The ink cartridges are
low on ink.
The MicroWeave option
is not turned on.
The Maximum Printable
Area setting is turned
on.
The paper thickness
lever is in the +
position.
#" $ 
Solution
Make sure the Media Type setting matches the paper you're using. See
Printing from Windows
Remove the paper and reload it with the printable side face up. See
Paper Loading and Handling Guidelines
Clean the print head. See
Check the black and
B
may need to replace. See
Turn on MicroWeave (if available) in the Advanced dialog box. See
Customizing Print Quality and Special Effects
Select Standard as the Printable Area setting to avoid banding in the
expanded margin area. See
Options for more information.
Set the paper thickness lever to the 0 position and try printing again.
See Envelopes for instructions.
or Printing from a Macintosh
for instructions.
Cleaning the Print Head
color ink out lights to see which cartridge you
A
Replacing an Ink Cartridge
Selecting Paper Size and Orientation
for instructions.
for instructions.
for instructions.
for more information.