Epson Stylus Photo 1200 User Manual page 48

The Rotate by 180
setting lets you print
the lower portion of a
document first, with a
bottom margin as
small as 0.12 inch
(3 mm) and a top
margin as small as
0.55 inch (14 mm).
When you select
Maximum as the
Printable Area
setting, print quality
may decrease in the
expanded printable
area in the bottom
margin.
Don't select
Maximum as the
Printable Area setting
if you're printing on
EPSON Ink Jet Back
Light Film.

  
4 If you loaded Photo Paper that you cut from a roll, select Banner as
the Paper Source setting. See
instructions on preparing and loading roll paper. With Banner selected,
you can't change the Collate, Reverse Order, Rotate by 180, or
Printable Area settings, or any Layout settings.
5 Select the direction of printing on the page with the Orientation options.
To print your document oriented as shown in one of the following
illustrations, select the options listed below it.
Portrait and
Portrait
Rotate by 180
6 The Standard Printable Area setting uses the maximum printable area
of your paper with a minimum bottom margin of 0.55 inch (14 mm). To
decrease the minimum bottom margin to 0.12 inch (3 mm), set the
Printable Area setting to Maximum. To center your document on the
page using either setting, select the Centered checkbox.
7 To collate multiple copies of a multi-page document or reverse the
order in which pages are printed, see
EPSON Banner Photo Paper
Landscape
Selecting Print Order
for
Landscape and
Rotate by 180
Options.