Epson Stylus Photo 1200 User Manual page 139

The printer software you installed with Windows 95 doesn't work correctly after you
upgrade to Windows 98
Possible cause
Your printer software
isn't set up correctly for
Windows 98.
While installing your printer software, you see the New Hardware Found window
Possible cause
Windows has detected
your printer.
#" $ 
)#   "  . 
If you have trouble with your printer software, first check that your printer
is selected as the Windows default printer or as the current printer in the
Macintosh Chooser. If you still have problems with your printer software,
check these solutions:
Solution
Uninstall the printer software after installing Windows 98, as described in
the Printer Basics book. Then reinstall it as described in the Start Here
card.
Solution
If you connected your printer using the parallel port, click Cancel. Never
select any other option on the New Hardware Found window .
If you connected your printer using the USB port, see the Start Here
card for software installation instructions using Windows plug-and-play.