Advanced settings
Shortcut operations
By using the buttons or knob, while holding down the [ENTER] button, you can use the shortcut operations to access
the functions in the Live Set Sound SETTINGS.
Locations
Operations
Transpose &
[ENTER] button + TRANSPOSE [−] button
Octave
[ENTER] button + TRANSPOSE [+] button
TRANSPOSE buttons [−] + [+] (together)
Part select button ([A]–[C]) + OCTAVE [−]
button
Part select button ([A]–[C]) + OCTAVE [+]
button
OCTAVE buttons [−] + [+]
Organ
[ENTER] button + VIBRATO/CHORUS
[TYPE] button
Live Set
Pressing two or three Part select buttons
([A]–[C]) at once
Holding down two of the Part select
buttons ([A]–[C]) at once
[ENTER] button + [SETTINGS] button
[ENTER] button + [MENU] button
[ENTER] button + MONO [TYPE] button
[ENTER] button + UNISON [TYPE] button
PAGE buttons [l] + [r]
Effect
[ENTER] button + EFFECT1–EFFECT2
select button
[ENTER] button + Effect [TYPE] knob
When using Tempo Delay for DELAY
Operations
[ENTER] button
[ENTER] button + DELAY [TIME] knob
42
CK88 CK61 Owner's Manual
Descriptions
Transposes the pitch of the keyboard up or down in semitones.
This operation is the same as Sound Transpose.
NOTE
The value is not transmitted as a MIDI message.
Keyboard Transpose is set to "0. "
Shifts the octave range of the specified Part up or down.
This operation is the same as setting the Note Shift to "+12" or "−12. " The Note
Shift range is from −12 to +12.
NOTE
The value is not transmitted as a MIDI message.
Keyboard Octave is set to "0. "
Switches the Vibrato/Chorus type in reverse order. This is useful when you
want to return to the previous type.
Selects multiple Parts at once. Useful for selecting the same settings for Filter,
EG, and Insertion Effects.
Swaps the settings of the selected Parts.
This operation is the same as [MENU] button Job Part/Effect Manager
Swap Part.
Resets the Live Set Sound currently being edited to its default state. This
operation does not overwrite the stored Live Set Sound. This operation is
useful when you want to reset all values to start over.
NOTE
To reset both the Live Set Sound currently being edited as well as the stored Live Set
Sound, use the [MENU] button Job Live Set Manager Initialize (page 40).
Determines whether the panel lock function is enabled (On) or disabled (Off ).
Opens the Portamento Time setting screen.
Opens the Unison Detune setting screen.
Shows the Live Set View.
To close the Live Set View, press the [EXIT] button.
Swaps the settings of EFFECT 1 and EFFECT 2 in the selected Part. This
operation is useful when you want to change the order in which the two
Insertion Effects are applied.
This operation is the same as the [MENU] button Job Part/Effect Manager
Swap EFFECT 1/2.
Moves to the beginning of the next or previous category. This operation is
useful when you want to quickly switch to the desired type.
For more information on Insertion Effect Types, see the "Effect list" (page 43).
Descriptions
Use the [ENTER] button as a Tap button. Press the button at least three times to
set the tempo.
Changes the Tempo Delay Time.