Yamaha CK88 Owner's Manual page 36

Advanced settings
Function name
Part A Touch
Part B Sensitivity
Part C
Common Transpose
Layer/Split
Live Set EQ
30
CK88 CK61 Owner's Manual
Description
Offset Determines the amount by which played velocities are adjusted for the actual
resulting velocity effect. This lets you raise or lower all velocities based on this
setting value—allowing you to automatically compensate for playing too
strongly or too softly. However, because of automatic compensation, the value
will be set to 1 when the result is smaller than 1, and the value will be set to
127 when the result is larger than 127.
velocity (affecting
the tone generator)
velocity (affecting
the tone generator)
Settings:
Changes the pitch up or down in semitones.
Settings:
Default:
NOTE
This setting does not affect MIDI output messages.
Mode Selects the combination of Layer and Split.
You can also use the [SPLIT] button for this setting.
Settings:
Default:
Split Point Sets the Split Point or the lowest note on the right keyboard range using a
note name.
When using the split mode A/B/C, two Split Points are needed.
You can also use the [SPLIT] button to set the split point.
Settings:
Default:
C3 is MIDI note number 60.
Mode SW Turns the Live Set EQ Mode on/off.
Default:
EQ Settings Sets the EQ for the Live Set Sound.
High Gain Sets the gain for the high band.
Settings:
High Frequency Sets the frequency for the high band.
Settings:
When Depth = 64
and Offset = 32
127
Actual resulting
0 64 127
Velocity with which you play a note
When Depth = 64
and Offset = 96
127
Actual resulting
0
64 127
Velocity with which you play a note
0–127
−12–+12
+0
ABC, A/BC, AB/C, A/B/C
ABC
C#-2–G8
G2
Off
−12 dB–0–+12 dB
500 Hz–16 kHz
When Depth = 64
and Offset = 64
127
Actual resulting
velocity (affecting
the tone generator)
0 64
Velocity with which you play a note
127