Related Manuals for Celexon DELUXX 1000004533
Summary of Contents for Celexon DELUXX 1000004533
- Page 1 User manual DELUXX Cinema Electric Screen (Tension) Thank you for choosing a quality DELUXX product. Please read this manual carefully before using the screen and keep it in a safe place.
-
Page 2: Safety Instructions
Auf http://www.deluxx.com/downloads finden Sie die aktuelle Version dieser Bedienungsanleitung zum Download. Please visit http://www.deluxx.com/downloads for the latest version of this manual. Veuillez visiter http://www.deluxx.com/downloads pour obtenir la dernière version du manuel d‘utilisation. Op http://www.deluxx.com/downloads vindt u de meest actuele download versie van de bedieningshandleiding. - Page 3 Safety instructions Hanging loads must be tested at least twice a year for strength and load-bearing capacity. Use the product and all accessories only as intended. Children should not use the screen unattended or play underneath. Attention Please read the following instructions carefully and keep them for future reference. The manufacturer assumes no responsibility for damage to property or personal injury when the screen is used outside the recommended specifications, or in the case of improper installation.
-
Page 4: Care Instructions
Care Instructions NEVER clean the screen with alcohol or other detergents that contain solvents. Use only a soft and clean cloth with a mild soapy water, if necessary to remove dirt from the surface. Be sure to avoid contact with sharp objects. These could permanently damage the projection screen fabric. -
Page 5: Mounting The Screen
Lieferumfang m) 2x Carabiner n) 1x Stop adjuster o) 1x Instruction Manual p) 1x Trigger cable q) 1x Infrared Eye Mounting the screen Install the screen at a location visible to all viewers; ideally, the screen should be mounted central to the spectators. The lower third of the screen should be at about eye level of the viewer. - Page 6 Mounting the screen Then drill 2 holes each with an 8mm drill, insert the dowels into the holes and attach the mounting brackets with either the hex nuts (i) or the universal screws (g). Figure 2 2. Now lift the screen housing with two people and insert it carefully into the mounting bracket.
- Page 7 Mounting the screen 1. For mounting on a solid stone / concrete surface please use the heavy- duty dowels (j) or plastic dowels (h). Determine the position for mounting the mounting brackets (b) according to the housing dimensions and the height of the projection screen.
- Page 8 Mounting the screen Ceiling mounting (method 2) 1. Slide the mounting plates on the top of the screen housing (a) outward. (see Fig. 8) Figure 8 2. For mounting on a solid stone / concrete ceiling, please use heavy-duty dowels (j) or plastic dowels (h).
- Page 9 Mounting the screen 3. Attach the mounting brackets (b) to the back of the screen housing and tighten the safety screw. 4. Now hang the screen into the hooks of the previously installed ceiling hook plates. Figure 11 5. If you require a longer suspension, please use suitable material such as a metal chain (see Fig.
- Page 10 Operation of the screen Remote control: The delivery of the screen includes an infrared and a radio remote control. To use the infrared remote control please use the enclosed IR receiver (q). Insert the jack plug into the „ext. IR port „on the left side of the screen housing and orient the receiver so that it has visual contact with the IR remote control.
- Page 11 Operation of the screen RS 232/485 A. RS485 port setting B. Control Code 1) Baud Rate: 2400 1) “Up” Command: 0xFF 0xAA 0xEE 0xEE 0xDD 2) Data Length: 8 2) “Stop” Command: 0xFF 0xAA 0xEE 0xEE 0xCC 3) Odd-even Check: N 3) “Down”...
-
Page 12: Ec Declaration Of Conformity
Germany GmbH & Co. KG – Gutenberstr. 2 – 48282 Emsdetten, Germany www.deluxx.com – info@deluxx.com – TEL: +49 221 58834 51...