Display Box Operation - Vmac H400011 Owner's Manual

Display Box Operation

Splash Screen
Once power is sent to the Hydraulic Driven Air Compressor, the display box will
briefly light up every pixel, this is useful for identifying dead pixels. A second
splash screen will appear almost immediately displaying the VMAC logo, followed
by the Run screen. To exit the splash screen early, press any button (Figure 17).
Figure 17 — Splash screen
Run Screen
The Run Screen is the main screen that will be visible during normal use (Figure 18).
Hydraulic and compressor
Hour meter
"ON" / "OFF"
temperature indicator
(hrs : mins)
indicator
System
Message
pressure
window
Figure 18 — Run screen
Press and hold the "ENTER" (power) button to turn the system on. Press the button
once to turn it off.
Pres the "MENU" (back) button to the enter the main menu (see "Main Menu" on
page 47).
VMAC - Vehicle Mounted Air Compressors
43
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com