Chengdu Ebyte Electronic Technology Co.,Ltd.
2.2. Software Preparation
The product details on the Ebyte official website provide the download of the network debugging assistant
"NetAssist" and the serial port assistant "XCOM", as shown in the following figure. Official website address:
https://www.ebyte.com.
Download the configuration tool corresponding to the product details, use the "Ebyte Network Configuration Tool"
for "Gateway Radio", and use the "RF_Setting_E90.exe" configuration tool for "Serial Radio".
2.3. Hardware connection
Connect the antenna to the E90 radio and connect to the power supply (DC: 8~28V), RS485 connection, network
cable connection:
Connect the antenna
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd.
Above:
"Gateway
Radio" on
Next: "Serial Radio" is
connected
Connect RS-485 for "Serial
Radio"
E90-DTU(433C30E)-V2.0 User Manual
Connect
the
network
cable for the "Gateway
Radio"
7