Ebyte NB183 User Manual page 15

Chengdu Ebyte Electronic Technology Co.,Ltd.
PORT4
PORT5
PORT6
PORT7
PORT8
[Note] The status of some special working mode indicator lights:
1. Restore the factory, NET is always on for 5s, and the other indicators remain in the state until the NET goes out and then goes out;
2. Wait for the firmware to be burned, and the rest of the lights except the power indicator will flash with a cycle of 50ms, until the
upgrade file starts to be transferred, or the firmware burning is exited;
3. During the firmware burning operation, the other indicators except the power indicator flash in a cycle of 500ms until the upgrade is
completed;
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
UDP mode: the indicator light is always on；
Data sending and receiving indication: flashes when network or
serial port sends and receives data;
The link is not connected: the indicator light is off;
The link connection is successful: the indicator light is always
on；
Channel 4 Status
UDP mode: the indicator light is always on；
Indicator
Data sending and receiving indication: flashes when network or
serial port sends and receives data;
The link is not connected: the indicator light is off;
The link connection is successful: the indicator light is always
on；
Channel 5 Status
UDP mode: the indicator light is always on；
Indicator
Data sending and receiving indication: flashes when network or
serial port sends and receives data;
The link is not connected: the indicator light is off;
The link connection is successful: the indicator light is always
on；
Channel 6 Status
UDP mode: the indicator light is always on；
Indicator
Data sending and receiving indication: flashes when network or
serial port sends and receives data;
The link is not connected: the indicator light is off;
The link connection is successful: the indicator light is always
on；
Channel 7 Status
UDP mode: the indicator light is always on；
Indicator
Data sending and receiving indication: flashes when network or
serial port sends and receives data;
The link is not connected: the indicator light is off;
The link connection is successful: the indicator light is always
on；
Channel 8 Status
UDP mode: the indicator light is always on；
Indicator
Data sending and receiving indication: flashes when network or
serial port sends and receives data;
NB183S&NB183_User Manual
15