Chapter 2 Quick Start; Hardware Preparation; Software Preparation - Ebyte E90-DTU User Manual

Low-power digital radio

Hide thumbs Also See for E90-DTU:

Table of Contents

Chengdu Ebyte Electronic Technology Co., Ltd.

Chapter 2 Quick Start

In order to test the E90-DTU (400SL30L), the following hardware is required:

One PC with more than two USB-A ports;

Two low-power output radios E90-DTU (400SL30L) (hereinafter referred to as "radio");

Two DC12V1A power adapters to provide power for low-power digital radio;

RS-485 cable and flat-blade screwdriver for connecting USB to RS-485 and radio;

TX433-JKD-20P, two 433MHz internal thread and internal needle antennas;

E90-DTU(400SL30L)*2

The product details on the Ebyte official website provide the configuration host computer

"E90-DTU-400SL30L.exe" and the serial port assistant "XCOM.exe" to download, as shown in the figure below.

Official website address: https://www.ebyte.com.

Power adapter (12V1A)*2

Several RS485 cables

E90-DTU(400SL30L)_UserManual_EN

USB to RS-485*2

Slotted screwdriver

TX433-JKD-20P

(SL-3.0)

Table of Contents

400sl30l