Epson Stylus CX9400Fax Series Quick Manual page 20

6. Press
Menu
■
Resolution
■
Contrast
■
Fax Delay
another fax until the delayed fax has been sent or cancelled.)
■
Fax Mode
machine to which you have dialed (such as a fax information service).
Change the setting back to
Press
OK
7. Press
OK
8. Press x
Settings
If you are scanning with the Automatic Document Feeder, your document is
automatically scanned and faxed.
If you placed your document on the scanner glass, you see this screen after the
first page is scanned:
If you need to fax additional pages, place your original on the scanner glass or
in the Automatic Document Feeder. Then press
need to fax another page, press
Note:
If the fax number is busy, you see a redialing message and the CX9400Fax Series
redials after one minute. To redial immediately, press Redial/Pause.
20
Faxing a Document or Photo
, if necessary, to adjust any of the following settings:
to increase the scanning resolution of a faxed document
to change the contrast of the faxed document
to specify a different time to send your fax. (You cannot send
to select
Polling
when you're done selecting settings.
, if desired, to see a summary of your fax transmission settings.
to send your fax. To cancel faxing, press y
Start
.
mode to receive a fax from another fax
when you're finished.
Sending
OK
. Your document is faxed.
Back
Stop/Clear
to continue. If you do not