Table of Contents
Advertisement
G.3
View of module composition
100 racks/hour
Wash + Rinse
1125 mm
Possible drying zone added only at the machine outfeed
after the rinse zone
DT 22"
559 mm
G.4
Description of machine modules
The machine consists of the following zone:
• wash and rinse zone in the same module.
It can be integrated with the following units:
• energy recovery/steam suppression device;
• drying zone.
H
CONTROL PANEL DESCRIPTION
H.1
Control panel overview
1
2
1
Touch screen with direct selection of functions. Touch
the selected icons to activate the corresponding
functions.
2
Switch disconnector
H.2
Touch screen description
The machine works using a touchscreen with touch-sensitive
icons.
Touch the icons on the screen to activate the requested
actions or to see information related the machine, the wash
cycle or any malfunctions.
DT 90°
559 mm
G.4.1
Wash zone
Water with the addition of detergent is sprayed on the dishes
through an upper and lower wash arm system.
The purpose of this function is to remove all residuals of food
from the dishes. Washing is carried out with water circulating at
a temperature of 55-65℃ / 131-149℉.
G.4.2
Rinse zone
Water with the addition of rinse aid is sprayed on the dishes
through a system of arms equipped with special nozzles.
The purpose of this function is to remove all residuals of
detergent deriving from the previous wash phase. Rinsing is
carried out with clean water coming from the water system,
heated to a max. temperature of 80-90℃ / 176-194℉. The high
temperature ensures satisfactory drying and careful neutrali-
zation of bacteria. The addition of rinse aid allows the water to
easily run off the dishes, thus favouring the drying process.
G.4.3
Drying zone
The dishes come under a flow of hot air in the drying zone,
facilitating the water evaporation process. Drying occurs with
hot air at a temperature of 50-60℃ / 122-140℉. This function
can be added at the machine out-feed after the rinse zone.
G.4.4
Energy recovery/steam suppression device
The rack-type dishwasher can be supplied with an energy
recovery/steam suppression.
You can order this device separately in a special assembly kit.
ESD
It consists of a fan and an air-water heat exchanger.
By means of the fan, the steam present inside the
wash zone is exhausted and condensed thanks to
the heat exchange with the cold water entering.
The condensed steam (water) is recovered in the
wash tank. This also offers the advantage of
heating the cold water entering, recovering a part
of the heat that would otherwise be dissipated into
the environment.
NOTE!
This type of touch screen allows you to start, stop
or change some settings in all of normal work
conditions:
• hands with gloves;
• wet or dirty fingers.
Main touch screen icons
Wash speed icon
Pause icon. Touch it again to start the wash
speed previously set.
Touch this icon to activate "Pop Up menu"
Touch this icon to deactivate "Pop Up menu"
Touch this icon to come back to the previous
menu
Touch this icon to confirm your selection
Touch this icon to scroll up the screen page
Touch this icon to scroll down the screen page
This icon appears when you have set a function
and you want come back to the "Pop Up menu"
13
Advertisement
Table of Contents
