HP Notebook Series Hardware And Software Manual page 99

Security
Setting an HP Administrator Setup Password
An HP administrator Setup password is set in the Setup utility:
1. Open the Setup utility by turning on the notebook. Press
while the Setup message is displayed in the lower-left corner
of the screen.
2. Use the arrow keys to select Security > Administrator
Password, and then press
3. Type the password in the Enter New Password field, and
then press
4. Type the password in the Confirm New Password field, and
then press
5. When the Setup Notice is displayed, press
your preferences.
6. To set your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
5–14
enter.
enter.
enter.
Hardware and Software Guide
f10
to save
enter
f10,