Navigating And Selecting In The Setup Utility; Restoring Setup Utility Default Settings; Exiting The Setup Utility - HP Notebook Series Hardware And Software Manual

Software Updates, Restorations and Utilities

Navigating and Selecting in the Setup Utility

Because the Setup utility is not based on Windows, it does not
support the TouchPad. Navigation and selection are by keystroke.
■
To navigate, use the up and down arrow keys or
■
To select an item, use the arrow keys to select the item, and
then press
■
To close a display but remain in the Setup utility, press
An on-screen guide to navigation and selection is displayed at the
lower edge of most Setup utility submenu screens. To minimize
keystrokes by using the <Alt> Key Activates Accelerators
feature:
1. Press and hold
items is highlighted.)
2. Press the keyboard key corresponding to the highlighted
letter or number in the item you want to select.
For example, to select an on-screen OK button, press
When the "O" in OK is highlighted, press

Restoring Setup Utility Default Settings

To return all Setup utility settings to default values, select File >
Restore Defaults. (Identification information, including ROM
version information, is retained.)

Exiting the Setup Utility

■
To close the utility and save your changes from the current
session, select File > Exit Saving Changes.
■
To close the utility without saving changes from the current
session, select File > Exit Discarding Changes.
When you select either option, the Setup utility closes, and then
Windows opens.
9–14
enter.
(A letter or number in most on-screen
alt.
O.
Hardware and Software Guide
tab.
esc.
alt.