HP Notebook Series Hardware And Software Manual page 97

Hewlett-packard notebook hardware and software guide
Hide thumbs Also See for Notebook Series:
Table of Contents

Advertisement

Security
Deleting a Power-On Password
A power-on password is deleted in the Setup utility:
1. Open the Setup utility by turning on the notebook. Press
while the Setup message is displayed in the lower-left corner
of the screen.
2. Use the arrow keys to select Security > Power-On
Password, and then press
3. Type the current password in the Enter Current Password
field, and then press
the remaining password fields indicates that you are
removing, not changing, the password.)
4. When the Setup Notice is displayed, press
your preferences.
5. To set your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
Entering a Power-On Password
At the power-on password prompt, enter your password with the
same keys you used to set the password, and then press
After 3 unsuccessful attempts to enter the password, you must
restart the notebook and try again.
5–12
enter.
3 times. (Pressing
enter
Hardware and Software Guide
f10
at each of
enter
to save
enter
f10,
enter.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents