Epson WorkForce Pro WP-4595 DNF User Manual page 64

WP-4511/4515/4521/4525/4530/4531/4535/4540/4545/4590/4595
C
Click Settings to adjust the way your poster will be printed. The Poster Settings window opens.
D
Make the following settings:
Print Cutting
Guides
Overlapping
Alignment
Marks
Trim Lines
Note:
If you want to print only a few of the panels without printing the entire poster, click the panels that you do not want to
print.
E
Click OK to return to the Main window.
F
Click OK to close the printer settings window.
After completing the steps above, print one test copy and examine the results before printing an entire job. Then follow
the instructions.
"How to make a poster from your prints" on page 65
&
Printing
Prints guide lines for cutting.
Slightly overlaps the panels and prints alignment markers so that the panels can be
aligned more precisely.
Prints border lines on the panels to guide you when trimming the pages.
User's Guide
64