Step 6C Setting The Exterior Spindle (Left Hand Door); Step 6D Setting The Interior Spindle (Left Hand Door) - BRINKS BC40107 Installation Instructions Manual

6
Setting the Exterior Spindle —
C
Hinges
C1. Rotate the exterior spindle counter-clockwise
90 degrees until it clicks into place.
The lever catch will
face away from the
hinges of the door.
Lever catch away
from hinges
C3. Rotate the key 90 degrees
clockwise back to its home
position and remove.
Remove the label.
6
Setting the Interior Spindle —
D
D1. Rotate the interior spindle clockwise 90 degrees
until it clicks into place. The lever catch will face
away from the hinges of the door.
Lever catch
away from
hinges
(Left Hand Door)
After installation, the exterior lever will
Left Hand
point towards the hinges of the door.
Door
Exterior
Assembly (C)
90°
(Left Hand Door)
Interior
Assembly (G)
C2. Align the exterior lever assembly with the spindle.
Rotate the key 90 degrees counter-clockwise. Insert
the lever onto the
spindle until it
clicks into place
on the lever
catch.
90°
D2. Remove the battery cover (I) from the interior assembly
(G) by lifting it up and pulling out from its top and set it
aside.
Battery
Cover (I)
PAGE 7