Standard Components; Optional Components - ABB LGR GLA351 Series User Manual

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2

Standard Components

This section describes the analyzer components. Verify that each of the system
components has arrived before installation.
Basic free-flow system:

GLA351 Series analyzer

Analyzer power cord

User Guide (this document)

USB flash drive

Serial port connection cable (null modem type)

Exhaust muffler
Applicable for the GLA351-CCIA3

External Pump System
External pump (ACC-DP3H)
o
Pump power cord
o

Pretreatment box with five Teflon connecting tubes:
Two 6' x 1/4"
o
Two 6' x 3/8"
o
One 3' x 1/4"
o

Optional Components


External Pump System (includes connection kit and power cord); Options include:
3-head diaphragm vacuum pump (ACC-DP3H)
o
4-head diaphragm vacuum pump (ACC-DP4H)
o
3-head diaphragm vacuum pump- Europe only (ACC-DP20)
o
Dry Scroll Vacuum Pump (ACC-DS10)
o

Multiport Inlet Unit (MIU-16 or MIU-8)
Power cable
o
25-pin connection cable for control signal
o

Batch Injection System (OPT-BATCH-INJECTION)
Injection port to provide capability for discrete sample measurements via
o
syringe injection. Accessories include:






External Dynamic Dilution System (EDDS)
Power cable
o
BNC Control Cable
o
¼" x 6' Teflon connection tube with Swagelok tee connector
o
Available on select analyzers.
Syringe injection port
140 mL syringe
Centering needle
Septa (box of 50)
Septum puller
14