Motor Drive Units - Olympus 1 Instructions Manual

MOTOR DRIVE UNITS

Winder 1 (with M. 6V Battery
Holder 1)
Fixed directly to the camera base tripod
socket, the Winder 1 functions integral-
ly with the OM camera body to perform
single frame shooting.
The unit winds the film in approx. 0.3
sec. as soon as the exposure is made,
whenever the shutter release is pressed.
Operating on self-contained 4 AA Alka-
line batteries, it is capable of powering
approx. 50 rolls of 36-exposure film.
Size: 130 X 64 X 100mm (5.12 X 2.52
X 3.94 in.) Weight: 290g (10.2 oz.)
(less batteries)
M. 6V Power Pack 1
This pocketable power unit (4 AA
batteries) connects to the Winder 1 via
Motor Drive 1
The basic motor drive unit that forms
the foundation of the group. Fixed
directly to the camera-base tripod sock-
et together with the power supply, it
functions integrally with the OM camera
body. Operating on various power
sources such as penlight batteries, Ni-
Cd batteries, or AC, it is capable of
single frame shooting and max. sequen-
tial filming of 5 frames per second.
Size: 116 X 82 X 66mm (4.57 X 3.23
X 2.59 in.) Weight: 210g (7.4 oz.)
a 1.2m cord. Warmed by photographer's
body heat, permits operation
temperatures as low as -10°C (14°F).
41
M. 18V Control Grip 1
(with M. 18V Battery Holder 1)
A power supply that accepts 12 AA
Alkaline or Ni-Cd batteries. Can be at-
tached quickly to the Motor Drive 1.
Complete with a built-in release but-
ton, single and sequence
switch and release lock lever.
Size: 136 X 87 X 32mm, Weight: 160g
(less batteries)
M.15V Ni-Cd Control Pack 1
This is a flat-type rechargeable power
unit equipped with a special built-in
Ni-Cd battery to power
Drive 1, and provides maximum con-
tinuous filming rate of 5 f.p.s. as well
in as the single release capability.
Size: 129 X 35 X 67mm, Weight: 260g
selector
the Motor