Interchangeable Focusing Screens - Olympus 1 Instructions Manual

INTERCHANGEABLE
FOCUSING SCREENS
The OM System interchangeable fo-
cusing screens provide you with the
ultimate in focusing versatility. Op-
tional screens are available to suit
virtually every picture-taking situation.
The focusing screens come with a
special tool. To remove the focusing
screen:
a) Detach the camera lens from the
camera body (see p. 16).
b) Use the special tool provided to
push up on the release catch under-
neath the top ledge of the mirror
box (see the photo above). This
allows the screen and screen frame
to drop down.
c) Remove the screen from inside the
camera by gripping the tip of the
screen with the tool as shown.
d) To install the screen, fit it in the
(Handle with extreme care.)
frame and push the frame upward
gently until it clicks into place.
Gently shake the camera body to
make sure the screen is held secure-
ly in place.
IMPORTANT: Although
procedure could be done with fingers,
it is recommended that you use the
special tool supplied. Changing focus-
ing screens is a procedure to be han-
dled with great care. Trying to change
screen with your fingers can result in
fingerprints and costly damage to the
surface of the screen, the prism, or the
mirror. Should this occur, cleaning or
repair MUST be handled by an author-
ized service center. Such damage is not
covered by the product warranty.
20
List of Optional Focusing
Screens
the above
* See page 44 for
details.
(Specifications
subject to change
without notice.)