Olympus 1 Instructions Manual page 9

3. Attach the film end to the take-up
spool.
Draw out the film leader and insert it
into one of the slots in the film take-up
spool. Make sure the film is evenly
placed between the film guide pins.
Be careful not to permit the film leader
to protrude out of the opposite slot
when inserted into the spool.
To attach or remove the front lens cap,
press the spring-loaded lens cap retain-
ing clips on either side of the cap. The
cap then fits easily over the accessory
thread of the lens.
4. Advance the film.
Advance the film using the film ad-
vance lever. Make sure that the film
perforations engage on the sprockets
on both sides.
5. Close the camera back.
Close the camera back until it clicks
into place.
6. Tighten the film.
After closing the cover, fold out the
rewind crank and turn it slowly in a
clockwise direction until a slight resist-
ance is felt. This will take up any slack
in the film.
8
7. Check the exposure counter win-
dow.
Advance the film and depress the
shutter release button. Advance the
film once more until "1" appears in
the exposure counter window. The
rewind knob will rotate in a counter-
clockwise direction indicating that the
film is advancing properly.