Motor Drive Group Units - Olympus 2 Instructions Manual

MOTOR DRIVE GROUP UNITS

Winder 2 (with M. 6V Battery
Holder 1)
Attached directly to the camera
base, the Winder 2
single frame as well as sequential
shooting (2.5 fps).
Operating on 4 self-contained
AA Alkaline batteries, it is capa-
ble of powering approx. 50 rolls
of 36-exposure film.
Size: 130 X 64 X 98mm (5.12
X 2.52 X 3.86 in.). Weight:
290g (10.2 oz.) (less batteries).
M. 6V Power Pack 1
This pocketable power unit (4
AA batteries) connects to the
Motor Drive 1
The basic motor drive unit that
forms the foundation
performs group. Attached directly to the
camera base together with the
power supply. It is capable of
single frame shooting and se-
quential filming of 5 frames per
second.
Size: 116 X 82 X 66mm (4.57
X 3.23 X
210g (7.4 oz.).
Winder 2 via a 1.2m cord. Warm-
ed by photographer's body heat,
permits operation in tempera-
tures as low as—10° C (14° F).
of the
2.59 in.). Weight:
74
M.18V Control Grip 1 (with
M. 18V Battery Holder 1)
A power supply that accepts 12
AA batteries. Can be attached
quickly to the Motor Drive 1.
Size: 136 X 87 X 32mm. Weight:
160g (less batteries).
M. 15V Ni-Cd Control Pack 1
This is a flat-type rechargeable
power unit equipped with a built-
in Ni-Cd battery to power the
Motor Drive 1.
Size: 129 X 35 X 67mm. Weight:
260g.