Bandai Namco DEAD HEAT UNLEASHED Operation Manual page 31

7. Operation
(b) I/F INITIALIZE (STEERING & GAS)
This screen is used to initialize the control parts (steering wheel, accelerator).
In the I/O TEST screen, select I/F INITIALIZE (STEERING & GAS) and press the
enter button.
The I/F INITIALIZE (STEERING & GAS) screen appears.
Perform STEP 1 to STEP 6 below to initialize.
STEP 1 :
STEP 2 :
STEP 3 :
STEP 4 :
STEP 5 :
STEP 6 :
Select CANCEL to return to I/O TEST without saving the setting.
Select SAVE SETTING to save the setting and proceed to SWITCH TEST.
Turn the steering wheel completely to the left and press the Speed-
up Button.
Turn the steering wheel completely to the right and press the Speed-
up Button.
Center the wheel and press the Speed-up Button.
Press the right pedal all the way in and press the Speed-up Button.
Release the right pedal and press the Speed-up Button.
Initialization complete. Select "SAVE SETTING" and to finish.
I/F INITIALIZE (STEERING & GAS)
STEERING 32
GAS 180
**************************************************************
[STEP 1]
Turn the steering wheel completely to the left and press the
Speed-up Button.
**************************************************************
CANCEL
SAVE SETTING
SELECT SW : CHOOSE
I/F INITIALIZE (STEERING & GAS) screen
ENTER SW : ENTER
29