Bandai Namco DEAD HEAT UNLEASHED Operation Manual page 29

 2SHUDWLRQ
7-5-5 I/O TEST
This screen is used to test switches and other components.
In the MENU screen, select I/O TEST and press the enter button.
The I/O TEST screen appears.
Flip the select switch up or down to select an item. The selected item blinks.
Press the enter button to enter the selection.
When the selection is entered, the screen changes to the detailed information for
the selected item.
Item
CAMERA SETTING
I/F INITIALIZE (STEERING & GAS)
SWITCH TEST
LAMP TEST
I/O PCB
After completing all the settings, select EXIT and press the enter button to return to
the MENU screen.
CAMERA SETTING
I/F INITIALIZE (STEERING & GAS)
SWITCH TEST
LAMP TEST
EXIT
I/O PCB
Namco ltd. : NA-JA:Ver4.00JPN,Multipurpose.
I/O LINK STATUS
SELECT SW : CHOOSE
I/O TEST screen
Adjusts the shooting position of the camera.
Initializes the control parts (steering wheel, accelerator).
Tests the various switches.
Tests the lamps.
Checks the operating status of the NA-JV PC board (I/O PCB).
I/O TEST
Connect OK
OK 0000/0000
ENTER SW : ENTER
Description
27