Advertisement
OPERATING THE PRODUCT
1. Flip up the latch and remove the latch
connector from the groove to unlock the
battery cover. Open the battery cover.
2. Install the battery pack. Make sure that
the latches on the battery pack click into
place.
3. Close the battery cover. Hook the latch
connector on the groove and flip down
the latch to lock the battery cover.
4. Pour water into the inlet port to prime the
impeller inside the product. Place the
filter on the area or container with the
water to be transferred.
5. Press the on/off button to turn on the
product.
1
1
2
2
3
1
4
1
5
3
2
3
2
9
Operation
Advertisement
