Upgrading - Compaq Armada 4100 Reference Manual

Compaq personal computers reference guide armada 4100
Hide thumbs Also See for Armada 4100:
Table of Contents

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . .
4. Pry up the memory compartment cover by pulling up the wide
end of the cover.
5. Slide the first of two memory boards into the lower memory slot.
Then slide the second board into the top slot. The connectors
snap into place when boards are correctly seated.
6. Replace the memory compartment cover.
7. Turn the computer over again, right side up. Replace the
DualBay device, battery pack(s) and reconnect external devices.
8. The computer automatically recognizes the new memory and
reconfigures the system.

Upgrading

Depending on your computer model, you can upgrade the hard
drive, processor, and display. To upgrade, contact your Compaq
authorized dealer, reseller, or service provider for more information.
CAUTION: If you need to remove the memory expansion boards, be
sure to release the locking tabs that secure the memory boards in the
slots. If the tabs are not released, the connectors may break and cause
irreparable damage to the system board.
Understanding Software and Upgrades
10-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Armada 4100 series

Table of Contents