Protection Circuitry; Regulatory Compliance; Fcc Statement; Ised (Innovation, Science And Economic Development Canada) - Onlogic HX401 Product Manual

4.2 - Protection Circuitry

Parameter
Nominal operating voltage (Rated DC value of input)
These DC levels specified are the absolute max values for the pins for function and safety of the
system. The protection circuitry allows for brief transient voltages above these levels without the
system turning off or being damaged. A transient voltage suppressor on the power input allows
momentary excursions above stated limits. For input power consumption and current see
Appendix A.

5 - Regulatory Compliance

5.1 - CE
This device has been tested to the relevant EMC and Safety standards. Modifications by the user
may invalidate certifications. Testing included EN 55032, EN 55035, EN 60601-1-2, EN 62368-1, and
IEC 60945 Ed. 4.

5.2 - FCC Statement

This device complies with part 15 of the FCC rules as a Class A device. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired operation.
5.3 - ISED (Innovation, Science and Economic Development
Canada)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
CAN ICES-003(A) / NMB-003(A)
Value
12~24V
(+/-10%)
29