Onlogic HX401 Product Manual page 17

Note: Located above the power barrel is a sheet metal punch-out for the plastic cable retention
clamp. To use this feature the sheet metal tab needs to be removed with the backplate uninstalled to
ensure the tab does not break off into the system.
DisplayPort 1.4a
Helix utilizes Intel' s Integrated Gen 12 processor graphics that power the onboard DisplayPorts 1.4a.
This means resolutions up to 4096x2160 @ 60Hz are supported on both outputs simultaneously. All
ports support Multi-Stream Transport (MST).
LAN1(vPRO) - Intel I219-LM
The Intel I219 LAN Port on Helix supports up to 1Gbps link speeds over standard shielded CAT5e or
CAT6 cables. The connector is the industry standard RJ45 connector. This port also features Intel' s
vPro(R) technology enabling remote out-of-band management and security features (requires Intel
Core i5 or higher). The LAN link state is shown by the two LEDs enclosed in the port. The description
is included below.
LAN2 - Intel I210-IT
The second LAN Port on Helix supports up to 1Gbps link speeds over standard shielded CAT5e or
CAT6 cables. The connector is the industry standard RJ45 connector. The LAN link state is shown by
the two LEDs enclosed in the port. The description is included below.
LED
LED1
LED2
LAN activity light description
State Function
Blinking 1Gb/s
Green activity
Blinking 100 Mb/s
Orange activity
Blinking 10 Mb/s
Green activity
17